################################################################################
                            NANOCOM-ASL
################################################################################
Microcode:
        M11B06E0_00000018.pdb
################################################################################
================================================================================
BIOS Name:      NASLAM18                (Based on : NASLAM17)
Build Date:     07/24/2025
Checksum:       NASLAM18.bin ADC3h
                NASLAM18.rom F5BEh for recovery
Matched EC:     ECoM_122
STS:            32089
Sign-on Message:
        NANOCOM-ASL R1.8 (NASLAM18)(07/24/2025)
Changes:
        1. Fix wrong memory frequency after load default.
        2. Roll back the delay setting to disable.
           Advanced -> AAEON BIOS Robot -> Delayed POST (PEI phase) [Disabled]

================================================================================
BIOS Name:      NASLAM17                (Based on : NASLAM16)
Build Date:     07/01/2025
Checksum:       NASLAM17.bin C951h
                NASLAM17.rom 114Ch for recovery
Matched EC:     ECoM_122
STS:            32089
Sign-on Message:
        NANOCOM-ASL R1.7 (NASLAM17)(07/01/2025)
Changes:
        1. Support wild voltage.
        2. Update LOGO (AAEON 2025).
        3. Update Secure Boot Keys.

Note. BIOS versions released after NASLAM17 can only be updated on motherboards(A12)
 that support wide voltage, in conjunction with ECoM_122 or later.
================================================================================
BIOS Name:      NASLAM16                (Based on : NASLAM15)
Build Date:     06/18/2025
Checksum:       NASLAM16.bin A49Eh
                NASLAM16.rom EC99h for recovery
Matched EC:     ECoM_121
STS:            32089
Sign-on Message:
        NANOCOM-ASL R1.6 (NASLAM16)(06/18/2025)
Changes:
        1. Add new SPD chip data (P/N:1468X00068).

================================================================================
BIOS Name:      NASLAM15                (Based on : NASLAM14)
Build Date:     05/19/2025
Checksum:       NASLAM15.bin 6CAAh
                NASLAM15.rom B4A5h for recovery
Matched EC:     ECoM_121
STS:            32089
Sign-on Message:
        NANOCOM-ASL R1.5 (NASLAM15)(05/19/2025)
Changes:
        1. Add new DQS table for new MB(A12) design.

================================================================================
BIOS Name:      NASLAM14                (Based on : NASLAM13)
Build Date:     03/19/2025
Checksum:       NASLAM14.bin 13DDh
                NASLAM14.rom 5BD8h for recovery
Matched EC:     ECoM_121
STS:            31247
Sign-on Message:
        NANOCOM-ASL R1.4 (NASLAM14)(03/19/2025)
Changes:
        1. Support SPD for Samsung memory chip (P/N:1468X00056), 4GB one channel only.
        2. Support SPD for Samsung memory chip (P/N:1468X00055), 8GB one channel only.
        3. Remove unused SPD of Micron memory chip (P/N:1468X00044), it is just for HW test.

Note:
Due to the lack of board to verify change items, please kindly share the test results to us.

================================================================================
BIOS Name:      NASLAM13                (Based on : NASLAM12)
Build Date:     01/13/2025
Checksum:       NASLAM13.bin CDF1h
                NASLAM13.rom 15ECh for recovery
Matched EC:     ECoM_121
STS:            30245
Sign-on Message:
        NANOCOM-ASL R1.3 (NASLAM13)(01/13/2025)
Changes:
        1. Fix fan Slope linear control fail
        2. Support BFPI brightness control

================================================================================
BIOS Name:      NASLAM12                (Based on : NASLAM11)
Build Date:     10/14/2024
Matched EC:     ECoM_119
STS:            27100
Checksum:       NASLAM12.bin CABBh
                NASLAM12.rom 12B6h for recovery
Sign-on Message:
        NANOCOM-ASL R1.2 (NASLAM12)(10/14/2024)
Changes:
        1. Fix "Memory Frequency" wrong if load default.
        2. Fix the smart fan module set wrong "Thermal Monitoring" value to EC
        3. Remove unsupported settings and combinations in "Graphics Configuration"

================================================================================
BIOS Name:      NASLAM11                (Based on : NASLAM10)
Build Date:     09/26/2024
Matched EC:     ECoM_119
STS:            27100
Checksum:       NASLAM11.bin 2570h
                NASLAM11.rom 6D6Bh for recovery
Sign-on Message:
        NANOCOM-ASL R1.1 (NASLAM11)(09/26/2024)
Changes:
        1. Add Workaround for USB3.2 port speed is limited to Gen1 issue
        2. Modify "EDID Advance Setting" page description to "Detail timing Setting"

================================================================================
BIOS Name:      NASLAM10
Build Date:     09/20/2024
Matched EC:     ECoM_119
STS:            27100
Checksum:       NASLAM10.bin 91EEh
                NASLAM10.rom D9E9h for recovery
Sign-on Message:
        NANOCOM-ASL R1.0 (NASLAM10)(09/20/2024)
Changes:
        1. First release

================================================================================
