################################################################################
                            NANOCOM-ASL
################################################################################
Microcode:
        M11B06E0_00000018.pdb
################################################################################
================================================================================
BIOS Name:      NASLAM14                (Based on : NASLAM13)
Build Date:     03/19/2025
Checksum:       NASLAM14.bin 13DDh
                NASLAM14.rom 5BD8h for recovery
Matched EC:     ECoM_121
STS:            31247
Sign-on Message:
        NANOCOM-ASL R1.4 (NASLAM14)(03/19/2025)
Changes:
        1. Support SPD for Samsung memory chip (P/N:1468X00056), 4GB one channel only.
        2. Support SPD for Samsung memory chip (P/N:1468X00055), 8GB one channel only.
        3. Remove unused SPD of Micron memory chip (P/N:1468X00044), it is just for HW test.

Note:
Due to the lack of board to verify change items, please kindly share the test results to us.

================================================================================
BIOS Name:      NASLAM13                (Based on : NASLAM12)
Build Date:     01/13/2025
Checksum:       NASLAM13.bin CDF1h
                NASLAM13.rom 15ECh for recovery
Matched EC:     ECoM_121
STS:            30245
Sign-on Message:
        NANOCOM-ASL R1.3 (NASLAM13)(01/13/2025)
Changes:
        1. Fix fan Slope linear control fail
        2. Support BFPI brightness control

================================================================================
BIOS Name:      NASLAM12                (Based on : NASLAM11)
Build Date:     10/14/2024
Matched EC:     ECoM_119
STS:            27100
Checksum:       NASLAM12.bin CABBh
                NASLAM12.rom 12B6h for recovery
Sign-on Message:
        NANOCOM-ASL R1.2 (NASLAM12)(10/14/2024)
Changes:
        1. Fix "Memory Frequency" wrong if load default.
        2. Fix the smart fan module set wrong "Thermal Monitoring" value to EC
        3. Remove unsupported settings and combinations in "Graphics Configuration"

================================================================================
BIOS Name:      NASLAM11                (Based on : NASLAM10)
Build Date:     09/26/2024
Matched EC:     ECoM_119
STS:            27100
Checksum:       NASLAM11.bin 2570h
                NASLAM11.rom 6D6Bh for recovery
Sign-on Message:
        NANOCOM-ASL R1.1 (NASLAM11)(09/26/2024)
Changes:
        1. Add Workaround for USB3.2 port speed is limited to Gen1 issue
        2. Modify "EDID Advance Setting" page description to "Detail timing Setting"

================================================================================
BIOS Name:      NASLAM10
Build Date:     09/20/2024
Matched EC:     ECoM_119
STS:            27100
Checksum:       NASLAM10.bin 91EEh
                NASLAM10.rom D9E9h for recovery
Sign-on Message:
        NANOCOM-ASL R1.0 (NASLAM10)(09/20/2024)
Changes:
        1. First release

================================================================================
