;/*++
;
;Copyright (c) 2010-2020 Intel Corporation
;
;Module Name:
;
;    skccontroller.inf
;
;Abstract:
;    INF file for installing skylake camera pmic (ACPI\XXXX) driver
;
;Installation Notes:
;    Using Devcon: Type "devcon update skccontroller.inf ACPI\XXXX" to install
;
;--*/

[Version]
Signature="$WINDOWS NT$"
Class=System
ClassGuid={4D36E97D-E325-11CE-BFC1-08002BE10318}
Provider=%INTEL%
DriverVer = 11/22/2024,64.26100.13.17675
CatalogFile=iactrllogic64.cat
PnpLockdown=1

[DestinationDirs]
DefaultDestDir = 13

;*****************************************
; Sensor Device  Install Section
;*****************************************

[Manufacturer]
%INTEL%=Standard,NTamd64.10.0...17134

; For XP and later
[Standard.NTamd64.10.0...17134]
%iactrllogic.DeviceDesc%=iactrllogic_Device, ACPI\INT3472
%iactrllogic.DeviceDesc%=iactrllogic_Device, ACPI\INT346F

[iactrllogic_Device.NTamd64]
CopyFiles=iactrllogic_Device.NT.Copy

[iactrllogic_Device.NT.Copy]
iactrllogic64.sys

;-------------- Service installation
[iactrllogic_Device.NTamd64.Services]
AddService = iactrllogic, %SPSVCINST_ASSOCSERVICE%, SKC_Service_Inst

[SKC_Service_Inst]
DisplayName    = %iactrllogic.SVCDESC%
ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
StartType      = 3               ; SERVICE_DEMAND_START
ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
ServiceBinary  = %13%\iactrllogic64.sys
Dependencies   = SpbCx,inteli2c

[iactrllogic_Device.NTamd64.HW]
AddReg         = iactrllogic_Device.AddReg

[iactrllogic_Device.AddReg]
;Use same security checks on relative opens
HKR,Parameters,DeviceCharacteristics,0x10001,0x0100
;Grant access just to built-in administrators, local system, and usermode drivers
HKR,Parameters,Security,,"D:P(A;;GA;;;BA)(A;;GA;;;SY)(A;;GA;;;S-1-5-84-0-0-0-0-0)(D;;GA;;;WD)"
HKR,"WDF","WdfDirectedPowerTransitionEnable",0x00010001,1

[SourceDisksNames]
1 = %DiskId1%,,,""

[SourceDisksFiles]
iactrllogic64.sys = 1

[Strings]
SPSVCINST_ASSOCSERVICE = 0x00000002
INTEL = "Intel Corporation"
iactrllogic = "Intel Control Logic Driver"
DiskId1 = "Intel Control Logic Installation Disk #1"
iactrllogic.DeviceDesc = "Intel(R) Control Logic"
iactrllogic.SVCDESC = "Intel(R) Control Logic"
